Cerberus Trifecta - Cerb v2 newbe build

[VirtueViolater]

download the cp210x files

 

[VirtueViolater]

and the stm files

 

[VirtueViolater]

once you download those two and you connect to your fc, give it a few mins to install your drivers, dont touch anything untill your gfu opens up. This is where a lot of people make mistakes

 

[VirtueViolater]

Raceflight is soo much easier to set up

 

[Futuramille]

so got the two files loaded.. then got and pointed at the .hex for pico (betaflight_3.2.0_PIKOBLX.hex)
cp210x and stm esb drivers are installed.
still can't connect and getting "no response from boot loader, programming: failed"

what am i missing?

 

[Futuramille]

I'm trying to flash firmware local i think?

 

[Futuramille]

this is 20 steps to frustrating. race flight was easier on the mini... but need to get this fingered.

 

[VirtueViolater]

You are having driver trouble, this should fix it

Downloads

 

[VirtueViolater]

Once again, thanks to JC RIP brother

 

[Futuramille]

i got the quad connected. tx/rx is bound but. . do i plug the tx into the computer in boot mode (taranis x9d). i did the port settings, serial rx and sbus.. bound the tx to the rx.. tx won't connect in betaflight

 

[theGreenOrange]

Do you have the quad's battery connected? Many FC do not power the receiver with USB power.

 

[VirtueViolater]

Sounds like you are using the wrong receiver protocol or something, check your ports, and receiver tabs over, make sure to hit save after changes

 

[Futuramille]

tried with it connected and not. i see the taranis as a joystick peripheral so its connected. ports are set like this... still nothing. went by the YouTube vid for the pico fc

 

[Wayno52]

Wish I could help Futura but I ain’t even slightly good at the computer side of things. Every time I try to change something I bugger it up. Lol

 

[Futuramille]

is both the tx and quad supposed to be plugged into the pc? what's the order of operations to plug things in. . tx first? I've tried several iterations

 

[theGreenOrange]

Don't plug in the taranis at all.

 

[VirtueViolater]

you have the wrong receiver chosen
Are you using spektrum?

 

[Futuramille]

taranis x9d plus sbus
xm+ rx
it binds to the quad just fine but not showing input in betaflight. quad is fully connected in betaflight.
seems betaflight and my tx don't like each other. i got the port settings from furious YouTube vids..

 

[VirtueViolater]

in your pic, you have the wrong receiver chosen under the receiver tab

 

[Futuramille]

this?