- Joined
- Aug 21, 2017
- Messages
- 17
- Reaction score
- 3
- Age
- 58
Hi guys, I'm very new to Drones but really excited to have laid my hands on an Eachine Wizard 220X. It looks amazing for £211 ready built including transmitter and goggles! I managed one flight (and broke 2 props) before realizing I had ordered it with the wrong handed controller (mode1 which has throttle in the right and I assume its more normal for right handed people to have throttle on the left? certainty for me it feels more natural after flying a few toys in that configuration).
So.. after a quick purchase of a new FS-i6 left throttle I'm now struggling to get flying again.
I've learned a lot about Betaflight and FSi6 settings the last couple of days but not enough it seems! The issue I have seems to be around failsafe and the Tx Rx settings. Betaflight software shows that the transmitter is doing all the right things but as soon as I arm the quad the motor runs, the throttle value drops to 885 without touching the throttle, it drops into failsafe and the motors stop.
I've watched and followed many online instructions but none of them are helping. Does anyone have any suggestions?
So.. after a quick purchase of a new FS-i6 left throttle I'm now struggling to get flying again.
I've learned a lot about Betaflight and FSi6 settings the last couple of days but not enough it seems! The issue I have seems to be around failsafe and the Tx Rx settings. Betaflight software shows that the transmitter is doing all the right things but as soon as I arm the quad the motor runs, the throttle value drops to 885 without touching the throttle, it drops into failsafe and the motors stop.
I've watched and followed many online instructions but none of them are helping. Does anyone have any suggestions?