- Joined
- Jul 16, 2018
- Messages
- 88
- Reaction score
- 66
So many choices now it's hard to pick a winner.
But I will say this, HD fpv cameras are great on a quad and the footage is pretty Dang good. Having said that they are not GoPro quality.
Heck of a lot cheaper though and a lot less weight.
Hard decision for you there but maybe a new 4k caddx tarsier?
The other thing to consider with the onboard HD cams is that they include a 20x20 board you have to find space for. Not a dealbreaker, but it doesn't look like the buzz has an easy spot to just drop one in.
Any help
Super easy .. Lol thank I really appreciate your help and time to text that to me I will give it a go what's the worst can happen !!!!!!!@irish-apple, super easy bro! The Green/Black is for the camera OSD menu joystick, so just leave it accessible somewhere in the build so you can fish it out and make changes, like "start recording at power on", contrast, brightness, etc.
The Red/Black/Yellow are the only wires to attach, check the input voltage claimed on the cam (I think it is 4.5v to 20v) and decide where you can get the power from for the Red/Black. Then wire the Yellow to either the FC Video In to pick up the OSD from the FC, or straight to the vTX Video In, I am guessing to the FC Video In since all modern quad FC's have built in Betaflight OSD.
Just asking your 100% about this buddy here's the board from the buzz@irish-apple, super easy bro! The Green/Black is for the camera OSD menu joystick, so just leave it accessible somewhere in the build so you can fish it out and make changes, like "start recording at power on", contrast, brightness, etc.
The Red/Black/Yellow are the only wires to attach, check the input voltage claimed on the cam (I think it is 4.5v to 20v) and decide where you can get the power from for the Red/Black. Then wire the Yellow to either the FC Video In to pick up the OSD from the FC, or straight to the vTX Video In, I am guessing to the FC Video In since all modern quad FC's have built in Betaflight OSD.
Just asking your 100% about this buddy here's the board from the buzz
black and green on the turtle which is the camera and ground I think for the control of itSo the board has a Camera Control (green wire), so you MAY be able to hook the green off the turtle to it and do joystick functions, dont know for sure and my only concern is cutting the connector off the turtle side. Other than that, yup Red to Red Black to Black and Yellow to Yellow. Whats confusing you or is your concern? By the way the black from the cam control lead may go to the same place (ground) as the other black, but not 100% sure it will work, you would have to try it, but I am pretty sure it would not do any damage if it didnt work.