Okay, I'm about to throw this thing in the trash. I've wasted 3 days trying to get this thing to fly right to no avail. Ive got the iFlight Cinebee 4k Hybrid. Here are the specs and a link to the bird:
CineBee Hybrid 4K Whoop SPECS:
It's got the SucceX Micro 16x16 Stack v1.5. I got it with an R-XSR Rx. It came with BF 4.0.4 and I didn't save the cli dump file as I should have. I don't think it would have made any difference in this case because it never flew right and they have the flashes on their site. The very first issue was that it flew really wonky and the motors got super hot, actually untouchable. I researched the heck out of the bird and the stack and have found minimal information. Any info I have found is on the BF 3.5.7 flash. They have the flash for 4.0.4 and 3.5.7 on their website. I tried flashing to 3.5.7 multiple time but the settings are off and the Accelerometer is always greyed out in the BF Configurator. It came configured with DShot600. I flipped back between 4.04 and 3.57 and I'm now back on 4.04. I also tried what shows up in the configurator as an "IFF411_PRO (IFRC)" board on v "4.1.3 - 16-01-2020 07:41". Both the 4 versions setup and try to fly but there wonky at best, I can't try 3.57 because the accelerometer doesn't show up. I'm going to process a short video clip to show it trying to fly that I'll post shortly. I'm attaching a copy of the CLI Dump file as it sits right now (I have not modified any of the settings other than the radio and OSD).
As always, any help would be greatly appreciated!
Jerry
**EDIT**- I'm running 3S 450mah batteries
CineBee Hybrid 4K Whoop SPECS:
- - Weight: 73.4grams
- - Wheelbase: 75mm
- - Runcam Hybrid dual cam 4K camera
- - Motor: XING1103 8000KV
- - Flight stack: SucceX Micro 16x16 Stack
- - Prop: HQ 1.6x1.6x4
It's got the SucceX Micro 16x16 Stack v1.5. I got it with an R-XSR Rx. It came with BF 4.0.4 and I didn't save the cli dump file as I should have. I don't think it would have made any difference in this case because it never flew right and they have the flashes on their site. The very first issue was that it flew really wonky and the motors got super hot, actually untouchable. I researched the heck out of the bird and the stack and have found minimal information. Any info I have found is on the BF 3.5.7 flash. They have the flash for 4.0.4 and 3.5.7 on their website. I tried flashing to 3.5.7 multiple time but the settings are off and the Accelerometer is always greyed out in the BF Configurator. It came configured with DShot600. I flipped back between 4.04 and 3.57 and I'm now back on 4.04. I also tried what shows up in the configurator as an "IFF411_PRO (IFRC)" board on v "4.1.3 - 16-01-2020 07:41". Both the 4 versions setup and try to fly but there wonky at best, I can't try 3.57 because the accelerometer doesn't show up. I'm going to process a short video clip to show it trying to fly that I'll post shortly. I'm attaching a copy of the CLI Dump file as it sits right now (I have not modified any of the settings other than the radio and OSD).
As always, any help would be greatly appreciated!
Jerry
**EDIT**- I'm running 3S 450mah batteries
Attachments
Last edited: