Welcome to DroneRacingPilots!
Join our free drone racing community today!
Sign up

480 class drone build battery

BlueJay

New Member
Joined
Nov 28, 2016
Messages
2
Reaction score
0
Age
21
Hi i'm building a drone with these are the parts tht i want to use:

MOTOR AND ESC COMBO: https://hobbyking.com/it_it/multist...and-matched-20a-afro-esc-set-of-4-cw-ccw.html

QUAD FRAME WITH PDB: https://hobbyking.com/it_it/s500-glass-fiber-quadcopter-frame-480mm-integrated-pcb-version.html

BATTERY: https://hobbyking.com/it_it/multistar-high-capacity-3s-4000mah-multi-rotor-lipo-pack.html

FLIGHT CONTROLLER: https://hobbyking.com/it_it/naze32r6-set-pcb-wire-pins.html

PROPS: https://hobbyking.com/it_it/gemfan-propeller-11x4-5-grey-cw-ccw-2pcs.html

i will use an AR6210 spektrum RX 6ch and a dx5e spektrum TX
this receiver does not support ppm so i wanted to know how to set up the Fight Controller to work with pwm and how to connect the pins of the ESC;

Are the ESC's going to power up the Flight Contoller? if yes how, which pins are going to do that?

Between the battery and the integrated PDB on the frame do i need to use a power management board or something like that? or i will just connect the battery right to it?
 

Latest threads

Members online

No members online now.

Forum statistics

Threads
3,551
Messages
30,314
Members
2,984
Latest member
gpz