What size screws do you need to mount a standard FPV camera?

[Cyberpower678]

As the title suggests, I have an FPV camera that has three screw holes on each side of the module. I have mounting clamps that mount to the frame, but I'm missing screws for it. What size screws are they usually and what length so I can get the right ones?

 

[M3talrocksFPV]

I wanna say 8mm I think, I usually just walk into the hobby shop and say, "Hey I need a screw for such and such" and the guys grab it. Found this too
RunCam-Swift-002 Bracket for RunCam Swift / Owl Plus (2pcs)

Could be the 6mm length ones

 

[Cyberpower678]

I wanna say 8mm I think, I usually just walk into the hobby shop and say, "Hey I need a screw for such and such" and the guys grab it. Found this too
RunCam-Swift-002 Bracket for RunCam Swift / Owl Plus (2pcs)

Could be the 6mm length ones

The thread depth is definitely not that long. I would peg it at 3mm. But do you have any idea if it's an M1 or M2. They're definitely not M3's or I would have screwed some in by now. :/

 

[M3talrocksFPV]

M2s only go to 4mm, m1 will have the 3. This is coming from helipal. So if you think it's 3mm its an m1 would be what you're looking for.

 

[Cyberpower678]

Then I think it's an M2. I'm going to take a guess and buy some.

 

[M3talrocksFPV]

Then I think it's an M2. I'm going to take a guess and buy some.

Heck, buy both, they should only be a couple of dollars for a pack of em

 

[VirtueViolater]

I would buy an assortment of m type screws, pretty inexpensive.

 

[Cyberpower678]

I would buy an assortment of m type screws, pretty inexpensive.

Yea, but I don't like then owning screws, I'm never going to use.

 

[VirtueViolater]

100Pcs M1.6 M2 M2.5 M3 Phillips Round Head Screws Bolt Precision Small Screw | eBay

 

[Cyberpower678]

Alright. I have the size I need. They are M2 screws at 4mm, and I'm guessing most FPV cameras have that size.