- Joined
- Mar 1, 2021
- Messages
- 5
- Reaction score
- 0
- Age
- 77
I have recently completed a build. On selecting Arm on my FS i6x the propellers spin at low revs as they should, on throttling up the motors respond with increasing rpm but on closing the throttle the motors don't respond and continue up to max rpm, the only way to stop them is by selecting the arm switch to off.
I note from a previous post that this could be due to the ESC protocol selected in Betaflight. I am using Little Bee 35amp ESC's and have selected Dshot 600 in BetaFlight, is this correct? or can anyone make any suggestion as to where I have gone wrong I am new to the world of drone building and flying so any advice would be greatly appreciated.
John
I note from a previous post that this could be due to the ESC protocol selected in Betaflight. I am using Little Bee 35amp ESC's and have selected Dshot 600 in BetaFlight, is this correct? or can anyone make any suggestion as to where I have gone wrong I am new to the world of drone building and flying so any advice would be greatly appreciated.
John