Hi guys! I'm having a bit of trouble getting my drone to work. This is the first drone I have made and I am having trouble getting the receiver to work in the receiver tab in betaflight. I've read many forums but I still can't work out the problem.
Parts I'm using:
FlySky FS-i6 transmitter
FlySky FS-R6B receiver
Racerstar StarF4S 30A Blheli_S Dshot 4 in 1 ESC AIO F4 OSD Flight Controller w/ BEC Current Sensor
The transmitter and receiver are bound (the red light stays solid when the transmitter is on).
I have connected the receiver to the G, 5V and SBUS tabs on the Racerstar FC at the front right-hand corner.
In betaflight I have tried all the serial RX ports (none of them work) and the receiver is set to a serial based receiver on the SBUS setting (I have also tried IBUS with no difference).
With everything set up the receiver still doesn't work in the receiver tab in betaflight. I have no clue what is wrong. Is there a setting I need to change in the transmitter or in betaflight or are the parts just not compatible? Any help would be appreciated. Thanks!
Parts I'm using:
FlySky FS-i6 transmitter
FlySky FS-R6B receiver
Racerstar StarF4S 30A Blheli_S Dshot 4 in 1 ESC AIO F4 OSD Flight Controller w/ BEC Current Sensor
The transmitter and receiver are bound (the red light stays solid when the transmitter is on).
I have connected the receiver to the G, 5V and SBUS tabs on the Racerstar FC at the front right-hand corner.
In betaflight I have tried all the serial RX ports (none of them work) and the receiver is set to a serial based receiver on the SBUS setting (I have also tried IBUS with no difference).
With everything set up the receiver still doesn't work in the receiver tab in betaflight. I have no clue what is wrong. Is there a setting I need to change in the transmitter or in betaflight or are the parts just not compatible? Any help would be appreciated. Thanks!