Hi,
I've got a problem on my 2" build. Front left motor is always very hot after only 30s hover. The rest are barely warm. I've checked the logs and I from the graph I can see that the activity line is always above the rest (image below)
Does anyone know why this might be happening?
I've swapped and changed the motors, calibrated them, updated ESCs, checked that the drone is balanced, played with filters, props are new and undamaged, it is running BF 3.3.1. The stack is furibee flytower plus mini and the motors HGLRC 1104 Flame 7500 kV it's running on 3s battery.
If you need the full log file it is available here: Dropbox - BTFL_BLACKBOX_LOG_Aurora_RC_20180123_190340.BBL
I would really appreciate any help as I've been stuck for 2 months now :\
Thanks a lot!
I've got a problem on my 2" build. Front left motor is always very hot after only 30s hover. The rest are barely warm. I've checked the logs and I from the graph I can see that the activity line is always above the rest (image below)
Does anyone know why this might be happening?
I've swapped and changed the motors, calibrated them, updated ESCs, checked that the drone is balanced, played with filters, props are new and undamaged, it is running BF 3.3.1. The stack is furibee flytower plus mini and the motors HGLRC 1104 Flame 7500 kV it's running on 3s battery.
If you need the full log file it is available here: Dropbox - BTFL_BLACKBOX_LOG_Aurora_RC_20180123_190340.BBL
I would really appreciate any help as I've been stuck for 2 months now :\
Thanks a lot!