Hello, I have some trouble with my drone. About a year ago, I was really into fpv drones. I bought the eachine wizard x220s and the flysky fs-i6s. When I got them I tried to bind them together, but I couldn’t get it to work. I tried all kinds of things but it just wasn’t working. After weeks of trying I basically ragequitted the hobby and put all the drone stuff in boxes away. Because of the quarantine I would like to pick the hobby up and try to get my drone flying. So this is where my problem comes in, I don’t know where to start and what I should do to fix it.
So I managed to bind my controller to the fs-ia6b receiver, but when I use the throttle, nothing happens. Also, if I plug my drone into my pc and open cleanflight/betaflight it says: “No configuration received within 10 seconds, communication failed”. I’ll send some photos of my drone and other stuff.
Thanks in advance.
Marijn
So I managed to bind my controller to the fs-ia6b receiver, but when I use the throttle, nothing happens. Also, if I plug my drone into my pc and open cleanflight/betaflight it says: “No configuration received within 10 seconds, communication failed”. I’ll send some photos of my drone and other stuff.
Thanks in advance.
Marijn
Attachments
-
IMG_20200419_155728.jpg154.8 KB · Views: 3
-
IMG_20200419_155732.jpg157.8 KB · Views: 4
-
IMG_20200419_162650.jpg200.7 KB · Views: 4
-
IMG_20200419_162652.jpg209.8 KB · Views: 4
-
IMG_20200419_162656.jpg231.6 KB · Views: 4
-
IMG_20200419_162658.jpg199.6 KB · Views: 4
-
IMG_20200419_162659_1.jpg221.3 KB · Views: 5
-
IMG_20200419_162705.jpg174.9 KB · Views: 5
-
IMG_20200419_162716.jpg245.6 KB · Views: 6
-
IMG_20200419_162721.jpg252.8 KB · Views: 5