Hello all
So here is the deal. Here is my equipment list:
1. GoPro Hero 3+
2. FPV 5.8G 200mW AV Wireless Transmitter TS351
3. 3s 11.1v 800mAh Battery
4. EMAX Transporter FPV Boxed Goggles 5.8G
5. Apex RC product 5.8ghz Transmitter Video output cable for GoPro Hero3
Here is the Problem:
So connect everything together and power up both the GoPro and Transmitter. Run the Auto function on the goggles and get fuzz on all setting but one which is just a blank screen. If i pull the battery from the transmitter the blank screen goes fuzzy so I think i am on the right channel. I am wondering if there is a setting i am missing.
I am switching from a setup using a onboard camera and a different transmitter and the goggles work just fine. I am at a loss. I have watched a few videos and it seems straight forward the hook everything up and power it up and bam its running.
Please help me find a clue.....
Thanks
So here is the deal. Here is my equipment list:
1. GoPro Hero 3+
2. FPV 5.8G 200mW AV Wireless Transmitter TS351
3. 3s 11.1v 800mAh Battery
4. EMAX Transporter FPV Boxed Goggles 5.8G
5. Apex RC product 5.8ghz Transmitter Video output cable for GoPro Hero3
Here is the Problem:
So connect everything together and power up both the GoPro and Transmitter. Run the Auto function on the goggles and get fuzz on all setting but one which is just a blank screen. If i pull the battery from the transmitter the blank screen goes fuzzy so I think i am on the right channel. I am wondering if there is a setting i am missing.
I am switching from a setup using a onboard camera and a different transmitter and the goggles work just fine. I am at a loss. I have watched a few videos and it seems straight forward the hook everything up and power it up and bam its running.
Please help me find a clue.....
Thanks