Flip32 F4 and Servo tilt.

[BillDebevc]

It’s making me sad I can’t figure this out.

Any insights. I can get the servos in the motor screen to move in beta flight.

Thinking is switching to a onboard arduino.

 

[HighTechPauper]

I'm sorry Bill, what's your question? All I see is an F4 board, ready to be soldered to. Am I missing something obvious to the casual observer?
As long as you plug that FC into a USB, you will be able to make the "sliders" in BF move, but that doesn't mean much except that the FC is working/talking and trying to tell the ESC's to spin up the motors, even if there is nothing there to spin up.

 

[BillDebevc]

Wow what was I smoking when I posted this?

Anyway, I am trying to get Servo Tilt to work on my Flip32 F4. The photo was for reference of what controller I have.

What I am trying to do is to have the flight controller drive a servo to tilt the FPV Camera.

I can get the servo #1 to change when tilting in the motor tab of betaflight. I just don't know how to tell the controller where the servo is, or where to plug it in for that matter.

 

[theGreenOrange]

I think maybe some guys use a PWM output directly from the receiver. Does your receiver have PWM individual channel outputs?

 

[BillDebevc]

Nope it's a Satellite RX receiver. just the three wires out.