Would like to change a setting or two on my Arris 280 x speed using the stock RTF Flycolor Raptor S-Tower w/ BHeli-S 2-4S 4-in-1 30A ESC + F3 + PDB + OSD (ASIN: B01MT8TWXI)
When first plugged in, the PC installed the driver, but nothing after that. The LED on the FCB comes on, but that's it, no adjustibility on the software...like its not seeing it.
Note: For CC3D boards on other drones = transmitter off, battery unplugged.software config works fine.....trying the same for this...but no lucky....what am I missing?
Please help me connect.
When first plugged in, the PC installed the driver, but nothing after that. The LED on the FCB comes on, but that's it, no adjustibility on the software...like its not seeing it.
Note: For CC3D boards on other drones = transmitter off, battery unplugged.software config works fine.....trying the same for this...but no lucky....what am I missing?
Please help me connect.