Recent content by WingsGB

Well i have been away with work this week but i am hoping to try get some air time this weekend. I am going to build another 1 out of my parts until i get this fixed. How do i check this? Yes my motors are fitted as the diagram says 1 in back right, 2 front right, 3 back left, 4 front left

Well i found a program called Blhelisuite which let me change the direction of the motors. They seem to be correct now. Now i am having another issue, once i arm the quad and start to give it some throttle. The quad just goes crazy and takes of spinning until i dis arm it. I didnt have any of...

I thought i would try getting into the hobby but 4 months later and i have only got to fly my quad 3 times. I built my first quad and i received a faulty motor, after waiting to get a replacement i then found out some parts didn't go with others so i wasnt able to use Telemetry. I have just...

So after checking and resoldering all the connections to that motor i found it to be still failing. I started to swop around the parts and it seems to be a faulty motor. Thanks for the input

everything feels the same as the other motors, I also couldnt see any obvious signs of debri.

Hey guys, So i was flying my quad when it just droped from the sky, Sounded like i lost power. I arm'd my quad on the ground and all motors span up. As i increaed my throttle all is fine then just as i start to get lift the front right motor makes a donk sound and stops. Disarm and re arm and...

So i needed to set the switches up on my q x7 first to channel 5 & 6. All is working now. Thanks

I am just setting up my revolt v2 FC after my first build but i am having issues. I feel i have everything wired correctly but while i am going through the setup on the raceflight FC it keeps failing on step 3, "Radio Setup" It asks to me to set my arming switch to "dissarm", I flip the back...

Thankyou for the manual that has helped alot. Thanks theGreenOrange, that has cleared everything up. Now i can concentrate on getting it nice and tidy.

Hey, It is my first time building a quad or owning one for that matter. I have sourced togeather all the parts i need and have started assembling. I have hit a point were i have too many wires and it is hurting my head trying to figure out how they should go. I am disaapointed not 1 item didnt...

Thankyou Jerry for all of the advice. I certinally will look into a different flight controller. As for the receiver can you tell me the difference between them or the benefits of 1 over the other. You mentioned the XSR which seems great but iv noticed people flying with the X4RSB and this is...

Hey guys, I am making the switch to FPV and qaud flying. This is the below setup iv decided on from reading around online. Can Someone tell me if i am missing anything from my list to complete the build, apart from props and materials. Do i need an antenna to go with the av transmitter &...