Recent content by Sambo1988

Hi mate JB made a video on the process

Hi mate You can get it working there is a pass through on betaflight so you can use it through your quad. But I have up graded to a qx7s Regards

Hi All something very strange happened to us at the weekend and i cannot get my head round it maybe someone can enlighten me. 3 of us were flying at the weekend we all fly together regularly and have different channels, but this particular time 2 of us have rxsr receivers in 4 quads and one...

Hi All thought i would share a fix to an issue i had with a new build it may help some out. i built and iflight XL5 low rider on Saturday and had its maiden yesterday an noticed i was getting a lot of noise and oscillation at mid throttle. i checked everything and ended up rebuilding it with...

It’s easy to do mate there is plenty of Vids on YouTube I have to do it regular my 3inch still has an f3 in it and no osd. Just run the cable to the positive battery pad.

What camera are you running? The most cameras now have the facilities to run a voltage meter that will show your battery voltage in your goggles without the need for fc osd

I had this issue on a omnibus f4 had to replace it to get OSD. but it still works fine with the camera connected to the vtx.

Hi all Had a fiddle with this morning figured it out it was the ground from the vtx to the camera swapped it to the same ground as the vtx on the FC and problem solved. Thought I would mention it in case anyone else has the same issue it might solve it. Sam

Hi all Just been out for a flight after putting all my components into a next frame and when increasing the throttle the OSD flickers on and off, when doing a punch out the osd stays off until I reduce the throttle, I have no issues with the video feed only the osd I haven’t had this issue...

Hi Neo thanks for replying, we have sorted it, new esc needed he brought it round for me to have a look at and when i desoldered it 4 mosfets were bunt on the under side.

Hi all My friend has a problem with his 4in1 he went flying all ok went home and then out again to fly the esc will not fire up, the flight controller is powered through the esc and it runs and operates fine it thinks it is armed but it seems as though the esc is getting no power but must be...

Ye I definitely can’t moan at the weather now you have top trumped me haha

Hi Mate i have checked the mmcx connector and it seems OK what i have just noticed is, i have a converter from rpsma to sma and it was slightly loose minimal but it was loose. i did have it mounted coming out of the back but shrink tubed it to stop it grounding with the frame. i have now put a...

Hi all Just a quick one I have a great setup and have never had any issues with video feed but I went out yesterday and I was getting really bad break up (not noise) at around 10ft infront of me with no obstructions, I have checked everything over and can see anything wrong any ideas Thanks...

Hi Mate i have been flying 5inch quads now for about 2 years and if i had to do it again i would defiantly build one if you are confident with soldering. i brought a wizard x220s and had no end of problems and ended up rebuilding it with quality components, i have now built a few from scratch...