Recent content by landonnap

I got the TX to work but still working on vtx looks like a camera issue

I am having the same issue, with the same controller and receiver combo except I am using betaflight (pretty much the same as cleanflight, I am not getting those last two beeps though upon startup

Sorry for how many issues I have and how much I post but once again I've run into two problems. The first being I cannot get my transmitter to work with betaflight as in i get no readouts when I go to the receiver tab, I have tried both ibus and ppm setups but am very confused, I have my FlySky...

So just solder the vtx power wires to the battery connections?

As it turns out my Lumenier AIO Alpha does not seem to have a pad higher than 5v on it(if I am missing one and there is please let me know) but my vtx has an operating range of 7v to 20v so I was wondering if I could wire up two of the free 5v pads together to create a 10v current, this sounds...

I did end up needing it btw, thanks for helping me guys!

I was watching a video on how to set up the receiver for the the transmitter I am getting and the guy has this cable and it doesnt look like it comes with either my Lumenier Alpha Aio FC or the controller and receiver combo, what is this cable and do I need to get one or does it come with the...

Ok, I definitely will try to find some cheaper components. Does the FC ESC stack I listed need a power distribution board?

I usually use the video feed and I see where fpv would be very useful but the goggles are so expensive, I did find a really cheap pair of goggles for like $40 but you get what you pay for. I will try and find fpv gear that I can afford.

Hello, I have a few questions about building a racing drone. I am trying to build for under $200 just FYI. I currently am lucky enough to own a DJI Mavic so I do have some experience. So I went on getfpv.com and after a lot of research, I picked a few items out that I thought would work but I...