Welcome to FPVDronePilots!
Join our free FPV drone community today!
Sign up

Just Another New Guy..

Here's where I'm at ATM.
 

Attachments

  • IMG_20170409_190717503.jpg
    IMG_20170409_190717503.jpg
    4.1 MB · Views: 5
Still searching but any good drones rtf with the radiolink AT9S controller. Still doing some searching wile I get time to.
 
There aren't too many BNF (RTF with no transmitter) but you can get any ARF or just swap out the receiver on a BNF. Helipal used to carry some BNF for Radiolink, not sure if they still do.
 
I'll take a look. If anything I do have a spare Rx for my radio link that should be small enough. Also worked on the drone as much as I could. All esc's are soldered and motors installed. Unfortunately my frame is 4.5mm thick, and my standoff hardware is to short to install my PdB and FC. So I'm going to order some standoff kit, xt-60 power connector for battery, and the connectors I need for the Rx and later the tx and camera
 

New Posts

Members online

No members online now.

Forum statistics

Threads
6,056
Messages
44,488
Members
5,366
Latest member
viorel007