- Joined
- Aug 8, 2020
- Messages
- 19
- Reaction score
- 6
- Age
- 19
My taranis and my drone wont seem to wanna bind to each other. I just started this hobby and bought this drone a few days ago and i just dont know what to do.
Is your QX7 accst or access? If it’s like mine (accst) it’s likely a firmware issue. The most current firmware for the R-XSR is for ACCESS and won’t communicate with ACCST. I found the accst version on line, flashed it and it worked just right.My taranis and my drone wont seem to wanna bind to each other. I just started this hobby and bought this drone a few days ago and i just dont know what to do.
I'll second that!If anybody can help you, it would be HighTechPauper. He's the man around here on this stuff. ?
I have the ACCSTWelcome to the forum @jonathannord!
Look in the bottom right corner of your TX's display and see if it says ACCST or ACCESS, it should just be a matter of getting the correct version of firmware flashed on the TX's internal XJT module and the R-XSR. Let us know what you have and we will try to help you get it sorted.
Ok, if it really isn't binding with the RX it means the FW on 2 things (the QX7 Internal XJT Transmit Module, and the R-XSR Receiver) isn't compatible, what is your indications that it isn't bound? When your new it can be hard to tell exactly which link in the chain is broken.I have the ACCST
Okay the signs that i think that its not binder is beacuse there is no stick input and nothing is happening to the drone when i use the taranis. There is also no input on betaflight at reciever tab and mode tab. I can pmOk, if it really isn't binding with the RX it means the FW on 2 things (the QX7 Internal XJT Transmit Module, and the R-XSR Receiver) isn't compatible, what is your indications that it isn't bound? When your new it can be hard to tell exactly which link in the chain is broken.
There is no way to know what firmware each of these pieces currently has since there is no way to read it out of the pieces, so all you can really do is flash them both with compatible revs and see if it works. This stuff has all evolved so I can't just point you to a video to show you and explain everything correctly, the specifics of doing this would take a long time to explain through texts, maybe you can PM me and we can have a look.
how do you do that?The wire leads can be removed from the connector and put back in the right order.