Recent content by Fightinflight

I do appreciate the offer very much but it will not be needed, I was able to get everything goin on the lemon! If using pwm every channel has to be hooked up before any of them would read you can't just hook up 1 or 2 to test, definitely won't be making that mistake again. PPM will wait until i...

Lemon RX DSMX 6Ch Receiver Full Range (Spektrum® DSMX™ Compatible Receiver) | eBay now that I looked again it does not specifically mention ppm...

Yes that pic is from when I was trying to verify if there were any comms at all on either ppm or pwm between fc and rx, and that I knew were to change rx settings im fairly certain it is not a satalite reciever (if item description was correct from ebay)

Yes when I first ran into the problem I tried diff things to resolve it,one of them being unselecting uart1 in ports tab and screwing up everything, so I had to do a boot and re flash. Closest ive come so far is in pwm..if I take aux 1 and plug it into Chan 1-4 aux 1 will respond but if I put...

That was/is the working theory, I've tried wiring this thing ppm and pwm neither one produces any response in CF, I don't see a whole lot of settings in config to mess up..i selected appropriate rx and channel mapping and that should be it yes?

A quick pic

Hello ladies and gents, I recently purchased all the equipment needed to build and fly a 210mm H frame. Including a spektrum DX6i tx/ar610rx combo with a SPracing F3 deluxe FC, I went to install everything utilizing Ppm when I discovered the AR610 doesn't output a Ppm signal (lesson learned). I...