I got a new GEPRC Phantom toothpick and set it up. Got it bound and all the TX switches working. It flies very smooth.
Only problem is I can't change the vtx channel. I tried holding the button and plugging in, holding button for 5 seconds, etc, etc. Stays on the one channel. I went into the CLI's and changed the channel, but it is still not on the channel I want. I tried using the OSD, but can't get that to work.
Any ideas are appreciated.
One other thing is that the quad gets VERY hot. I thought maybe the vtx was set to a high output causing that , so in the CLI's I set vtx_power = 2, but it still gets very hot.
Not sure if that is normal, or if the two issues are related, but thought I'd mention that too.
As always, I thank you for your ideas and help.
Only problem is I can't change the vtx channel. I tried holding the button and plugging in, holding button for 5 seconds, etc, etc. Stays on the one channel. I went into the CLI's and changed the channel, but it is still not on the channel I want. I tried using the OSD, but can't get that to work.
Any ideas are appreciated.
One other thing is that the quad gets VERY hot. I thought maybe the vtx was set to a high output causing that , so in the CLI's I set vtx_power = 2, but it still gets very hot.
Not sure if that is normal, or if the two issues are related, but thought I'd mention that too.
As always, I thank you for your ideas and help.