- Joined
- Jan 31, 2019
- Messages
- 12
- Reaction score
- 2
- Age
- 61
This is my first build so EVERYTHING is being learned on the "fly" HA
Thanks to this Forum I was able to figure out that I needed to jumper the FC ibus pad and set my TX to PPM=ON. This was exciting because I now have control of my drone. At least according to the Receiver tab in Betaflight. I also have motor control via Betaflight. However, once I disconnect from Betaflight and attempt to arm and fly... i get nothing! The TX and RX bind but that's all. It won't even arm.
What am I missing? Something simple I hope.
Thanks to this Forum I was able to figure out that I needed to jumper the FC ibus pad and set my TX to PPM=ON. This was exciting because I now have control of my drone. At least according to the Receiver tab in Betaflight. I also have motor control via Betaflight. However, once I disconnect from Betaflight and attempt to arm and fly... i get nothing! The TX and RX bind but that's all. It won't even arm.
What am I missing? Something simple I hope.