well HTP, I'm not yet getting sound from the camera yet and Its got a mic. maybe we can do some magic. It would be cool to have blade and motor noise in my vids. Something I miss on the 2" with the micro split.Well fear not bud, it is possible that the FC is set up for Camera Control, it doesn't always work, but sometimes it does. Often lately you may see multiple pads, usually labeled CS and CC. CS is for the Camera video Signal, and the CC (Camera Control) goes to the OSD pin where the "5 button joystick" could get plugged in on the camera. If it works correctly I think it gives access to the "advanced" camera setting that usually you need to plug the joystick in to get to.
Thank you Jerry!! Motors were nice and cool. Barely warm. As I turn up D they may get a bit warmer but I've got alot of room to go up. Response was good but I may increase throttle at midpoint so it lifts off at 1/3rd stick. Plenty of "catch" ability (I really like Race Craft props). The battery was barely warm and I got almost 4min flights on an 850mah 4s.JJ,
Great maiden! It's super cool to see a bird go from a jumble of parts into a flying machine! How'd the motors feel when you brought her down? As you can tell from my posts, I've been struggling with motor issues so I'm trying to re-educate myself.
Here is some info off the Github BF Wiki page about getting audio.well HTP, I'm not yet getting sound from the camera yet and Its got a mic. maybe we can do some magic. It would be cool to have blade and motor noise in my vids. Something I miss on the 2" with the micro split.