I am Building my first fpv drone and I was hoping someone could help me out.
here are my parts
Battery
https://www.banggood.com/XF-Power-11_1V-...mywishlist
Battery charger
https://www.banggood.com/IMaxRC-IMax-B3-...rehouse=CN
Transmitter/receiver
https://www.banggood.com/Flysky-FS-i6S-2...rehouse=CN
xT60
https://www.banggood.com/XT60-Male-Plug-...rehouse=CN
esc x4
https://www.banggood.com/HAKRC-BLHeli_32...rehouse=CN
goggles
https://www.banggood.com/Eachine-VR-007-...ehouse=USA
Frame
https://www.banggood.com/HSKRC-TWE210-21...mywishlist
props
https://www.banggood.com/10-Pairs-GEPRC-...rehouse=CN
fpv cam
https://www.banggood.com/JJA-CM1200-13-C...ehouse=USA fpv
transmitter
https://www.banggood.com/Eachine-TX5258-...ehouse=USA
FC
https://www.banggood.com/9_4g-30_5x30_5m...ehouse=USA
Motor x4
https://www.banggood.com/DYS-Samguk-Seri...ehouse=USA
I have a concern if I have all of the needed wires to connect everything. also, does the receiver have the data and power wire come with it. Thank you for any feedback I am looking to try to stay around 200$ also, any videos for how to program it would be helpful Thank you for your time Connor
here are my parts
Battery
https://www.banggood.com/XF-Power-11_1V-...mywishlist
Battery charger
https://www.banggood.com/IMaxRC-IMax-B3-...rehouse=CN
Transmitter/receiver
https://www.banggood.com/Flysky-FS-i6S-2...rehouse=CN
xT60
https://www.banggood.com/XT60-Male-Plug-...rehouse=CN
esc x4
https://www.banggood.com/HAKRC-BLHeli_32...rehouse=CN
goggles
https://www.banggood.com/Eachine-VR-007-...ehouse=USA
Frame
https://www.banggood.com/HSKRC-TWE210-21...mywishlist
props
https://www.banggood.com/10-Pairs-GEPRC-...rehouse=CN
fpv cam
https://www.banggood.com/JJA-CM1200-13-C...ehouse=USA fpv
transmitter
https://www.banggood.com/Eachine-TX5258-...ehouse=USA
FC
https://www.banggood.com/9_4g-30_5x30_5m...ehouse=USA
Motor x4
https://www.banggood.com/DYS-Samguk-Seri...ehouse=USA
I have a concern if I have all of the needed wires to connect everything. also, does the receiver have the data and power wire come with it. Thank you for any feedback I am looking to try to stay around 200$ also, any videos for how to program it would be helpful Thank you for your time Connor