Looking for advice on whether to buy my next drone assembled or assemble my own.

[Jtrjr]

Off topic...

Phoenix,

Hey, you may have an opinion regarding a question I have. If you have a minute see my last post in this link:

The resurrection of "Frank"...

Thanks,

Jerry

 

[theGreenOrange]

Any recos on brand of camera I should mount. I'm looking to get some fat shark goggles

I would look for any camera with a Sony 1/3" CCD sensor. Runcam and foxeer are very popular, but there are some good generic ones with the same sensor.

 

[Serius]

I've done alot of research and settled on the Runcam Eagle....I found that I liked the quality of light control the best with the eagle. I have not installed it yet as im waiting on my Heatshrink to arrive

 

[Primo23]

I like the 1200tvl foxeer cam. Would this work well on a quad. Is there certain tvl range u want to stick to?

 

[theGreenOrange]

I will be getting a 1200tvl camera for my high res goggles. I don't have one picked yet exactly though.

 

[Primo23]

Can I go 2206 2300kv in this 250 frame. I saw some xnova motors I liked. What other requirements will I need as far as esc and flight controller

 

[theGreenOrange]

Can I go 2206 2300kv in this 250 frame. I saw some xnova motors I liked. What other requirements will I need as far as esc and flight controller

Those motors will work fine. Get 20A or 30A ESCs. I like BLHeli and BLHeli_S firmware.

There are lots of options for flight controllers, be sure to get F3 or F4 processor.

 

[Primo23]

Those motors will work fine. Get 20A or 30A ESCs. I like BLHeli and BLHeli_S firmware.

There are lots of options for flight controllers, be sure to get F3 or F4 processor.

Ty very much I appreciate the help

 

[Primo23]

What do the numbers mean on these motors? For instance 2206 2300kv

 

[theGreenOrange]

2206 = 22mm x 6mm stator size.
2600kV is a measure of how fast the motor spins at a given voltage.

 

[Primo23]

Thank u again.