Welcome to DroneRacingPilots!
Join our free drone racing community today!
Sign up

I want to swap my Camera but......?

Serius

Well-Known Member
Joined
Jan 29, 2017
Messages
241
Reaction score
38
Age
47
My stock camera is not bad but soon I would like to swap it for higher resolution & CCD (I have Cmos now). My issue is that the stock camera wires run to a small white connector attached to the PDB & the aftermarket camera wires run to a larger black connector.
 

TraumaChaser

Well-Known Member
Joined
Oct 10, 2016
Messages
277
Reaction score
156
Age
38
You're going to have to desolder the plug fro the board or cut the plug from your current camera and use for your new one.
 

Jtrjr

Well-Known Member
Joined
Mar 9, 2016
Messages
1,528
Reaction score
1,220
Location
Texas
Website
www.youtube.com
Serius,

Yeah, I just replaced a camera in my P200 yesterday and had the same issue to deal with. I had to de-solder and solder the new (+) and (-) wires on the PDB. My old camera was wired inside the camera body and the new one had an external 3 pin connector (+,-, Signal) so the 3 wires going to the VTX connector from the camera had to be cut, spliced and soldered. I'm not used to working with such small wires and connectors but was able to get it done.

Jerry
 

Serius

Well-Known Member
Joined
Jan 29, 2017
Messages
241
Reaction score
38
Age
47
Ohhh, ok. Thanks guys
 

Latest threads

Members online

No members online now.

Forum statistics

Threads
3,551
Messages
30,312
Members
2,984
Latest member
gpz