Welcome to the forum @sbones!
Trying to bind FS-i6 with "this"??? What is "this". I'm afraid you r going to have to give us more info
Hmm, have a feeling the mobula 6 has a frsky receiver and won’t be compatible with your FS-i6 (Flysky) transmitter. I have a couple of mobula micros and they are all BNF frsky.Fair enough ?
I'm trying to pair it with a Mobula 6.
I see. I suppose there is no definitive way to find out?Hmm, have a feeling the mobula 6 has a frsky receiver and won’t be compatible with your FS-i6 (Flysky) transmitter. I have a couple of mobula micros and they are all BNF frsky.
Well, like I said, I'm a newbie. Like new born baby newbie. I just realized that I need to use Beta Flight to configiure the receiver. It will work after all. The problem now is that I use a Mac and I need to use a PC to use the CLI and Beta Flight. Gotta dig that machine out of storage. No worries. I will update.you could probably tell which it is by plugging into BF and checking its FC target that is flashed into it, IF it is CRAZYBEEF4FS it is Flysky, if it is CRAZYBEEF4FR it is Frsky.
Didn’t know that!There is a Flysky version, check you r box and see which one it is.
View attachment 4436
I tried to search but I'm so unsure of the version. Could you show me a link?There is a BF Configurator for MAC too
I tried to search but I'm so unsure of the version. Could you show me a link?
Awesome! Thank you sir!Go here:
Release Betaflight Configurator 10.7.0 · betaflight/betaflight-configurator
At the bottom of the page, download this file: "betaflight-configurator_10.7.0_macOS.dmg".
So I only understand a few things from your reply, I will answer what I know first.Look at these things first...
TX and RX are not bound.
RX is not wired correctly to FC.
Improper config in Betaflight (Ports and/or Config tab).
Radio not configured properly for PPM or iBus.
Something is broken.
Flysky stuff can be a bit confusing, does your model of radio support iBus? Did you search for a youtube video to see how to go into the settings and configure it for iBus if it does support it?
The receiver does support iBus. But, while fumbling about with the receiver connector, I fried it by plugging it into the wrong type of battery. From what I was able to read online, that connection is only needed for RC planes and not quads.
In my experience, once something has any piece/part fried, it is no longer reliable.
The ports and config are correct for the quad as I am able to see the interface and it will not show the settings if it is not connected. As for the receiver, I don't know. It does not affect anything in Betaflight.
This doesn't make any sense to me, there is only one way to know that the ports and config are correct, and that is when you get stick movements in the Receiver tab in BFC
TX and RX not bound- I don't know how to tell. I can enter RX binding mode but it never connects with the quad.
I am assuming you are bound since you seem to say that telemetry shows on the radio when power is applied to the RX
Radio not configured properly for PPM or iBus. - I assume it's not.
There is a video on youtube to walk you through the iBus setup
Something is broken - other than the recivere connector I don't think so but I can't be sure.
You can only be sure when it is all working properly, until then, yo can never be sure.
Thanks!
Sorry I am not a Flysky user so I am unfamiliar with what they offer. Hopefully one of our members that has used Flysky before can chime in.I'm ready to give up on this receiver. Can anyone recommend another one with less steps to set up?