Welcome to FPVDronePilots!
Join our free FPV drone community today!
Sign up

Babyhawk R and IBUS

nitrovapor

New Member
Joined
Sep 4, 2018
Messages
1
Reaction score
0
Age
57
Hi all I recently purchased the Babyhawk R and installed the FS-A8S reciever for my turnigy evolution and can only get SBUS working does anyone know if this F3 Fury FLIGHT controller supports IBUS? there is also 4 open terminals near the USB that are not marked and was wondering if anyone knew what those are for and I also tried soldering my input from my reciever to the other S terminal for the spectrum as per RDQ support but that didn't work either and I also tried to set serialrx_inverted=off in CLI like i had to do with my KingKong 125 but that didn't work either, any ideas? thanks
 
If you aren't flying yet, I'm pretty sure SBUS on FC is where you want receiver signal wire. Also choose SBUS in BF configurator. Choose IBUS on your transmitter. That should do it. I think
 
  • Like
Reactions: VirtueViolater

Members online

Forum statistics

Threads
6,011
Messages
44,354
Members
5,307
Latest member
Kodax