Welcome to FPVDronePilots!
Join our free FPV drone community today!
Sign up

help

  1. W

    Meteor65 HD question

    Hello everyone, I am a new pilot to FPV and am looking to buy a Meteor65 HD to get me started, but have a few questions regarding it. 1. From what I understand the M65 HD can be flown with some cheap analog goggles while still recording some decent 1080p 60fps video to the SD card on board...
  2. D

    Mobula 7 1s Issues

    Hello, after hours of tinkering I have come to ask for help. I have a radiomaster zorro reciever and a mobula 7 1s drone that worked perfectly out of the box for a couple of months. A while ago i put in a new frame and new props. I suspect I put the wrong props on because it didn't fly... I...
  3. H

    My drone wont arm

    Running emuflight and ive had people look at it no one can figure it out. Beta flight controller with crossfire module. drone has crossfire nano rx. Light is green its defintly binded. None of the buttons will arm the drone. In emu flight it shoes the drone is level and on the beta flight config...
  4. X

    ESC malfuntion

    Hello, i crashed my drone, replaced a motor, replaced my ESC, and now my drone won't work. My fpv drone keeps restarting every time once the battery is plugged in. I flashed my FC, flashed my esc with bl heli I can only arm if i have my drone plugged into my PC, weird. What can i do
  5. S

    NEED HELP

    Just got a new Dji Fpv Drone and during launch it wanted to tilt backwards, so i added more throttle and forward movement (right stick) and it still went backwards i ended up shredding the rear two blades and i have no clue why it did that, i calibrated everything and the props were on properly...
  6. J

    Tips on learning the FPV Drone

    I have just ordered the DJI FPV Drone (not to be confused with the new one that just came out.) and would like some tips or advice on this new toy I have just ordered. I have used it on the DJI Virtual Flight App, and was overwhelmed when I put it into manual mode, and the controls for manual...
  7. R

    Looking to step up my filmmaking!

    I've been thinking about getting into cinematic FPV for almost two years now. After doing quite a few hours of research tonight, getting into it is even more intimidating than expected. I'm looking for a set up that is optimal for a beginner but has a little room to grow (I've found maybe the...
  8. P

    Building my first freestyle quad

    Hey this is my first post on this forum hopefully you can help me. So actually im not new to flying FPV but its my first time ever building my own. I looked for some parts the whole day so here is what i came up with: Frame: ImpulseRC Apex 5" HD Freestyle Frame Motors: FPVCYCLE 25MM IMPERIAL...
  9. R

    Help with R9M/R9 Mini OTA with Mamba F722

    I've got my R9M bound to my R9 Mini. Both transmitter and receiver have latest access firmware. I had s.port of receiver wired to TX1 pad of FC and got no transmitter control showing up in betaflight. I've also tried using sbus through the RX1 pad and still nothing. Can anyone help in setting...
  10. R

    Turnigy 9X Compatibility Question

    So I built a quad years ago using a frsky x4r receiver and the frsky XJT transmitter in my turnigy 9x radio. I'm building a new drone and ordered a bunch of new parts and got the FrSky R9 Mini receiver and FrSky R9M transmitter after not understanding if any new receivers worked with the XJT I...
  11. L

    ESC FAIL

    Hi, not sure if this is the right forum or not but, Im new to the building of FPV quads, so i asked my mate to build my drone for me. anyways currently down 2 ESC's. can anyone tell me why this has happened i will admit first ESC was all on me. second one i bought a new ESC stack x2. he...
  12. K

    Hi I’m looking to get into this hobby and have a few questions....

    Hey I’m new and have been researching but have a few questions... The simulator seems the way to start but with the huge amount of brands and different things involved I don’t even know where to start... I thought about buying the tiny hawk kit on Amazon but feel like I should just buy a...
  13. D_The_Producer

    Is there a way to calculate my Cinewhoop's MTOW or MTOM?

    Hi again friends! As I stated last week, I am new around here and also to the FPV world (though I'm an EASA certified pilot since last year and I am in several of this network of drone forums) I've been reading and watching videos like crazy the past few weeks but some questions still pop to my...
  14. A

    Help the noob!

    Hi guys, I am very new to the world of fpv. I bought an RTF package a few months back and have been loving it. It’s a 5inch 6s quad. Unfortunately while filming some on water sports, the quad went for a swim! I managed to get it back from the salty sea about 5 hours later. I washed it in fresh...
  15. B

    Please I need help ASAP

    Hi, can you help me with something? I’m building my own for drone I’ve got all my parts ready to go it’s just how did you attach your controller to the flight controller? I am a rc car hobbyist and I’m just confused on the receiver and radio part of it. I am currently studying electronics and I...
  16. Thebigskysky

    Keep smoking GPS modules

    I have a Flywoo Explorer LR with the GPS and like may others I was frustrated with the time it took to acquire sufficient sat lock after plugging in my battery (3-5 minutes). So following a video from TMac (link below) I wanted to isolate power to the module so that it can acquire its lock...
  17. N

    Newbie needs help!

    So as the title says im new to this hobby and new to the website. Ive bought a couple of drones to get into the hobby but im not the most technical guy in the world, my most recent issue is with my Eachine trashcan, I can barely get 1 minute flights before the batteries out of juice this is...
  18. Winks

    Failsafe trigger on liftoff?

    I've done my best to go through and see if there's a similar post to this, to avoid flooding the forum with unnecessary posts, but I haven't found anything yet. This is my first build and I'll do my best to provide as much information as I can. I'm using the dragon X5 frame and have my drone...
  19. 1

    Need help buying the correct parts for my first racing drone.

    Hi, So I have not been keeping up with the fpv drone racing world for quite some time now (3 years? been a while), but now I have some free time to build something. Here is what I know I want for my drone: fast, smooth, and efficient. - A 250 size drone on the zmr250 frame. Is there anything...
  20. D

    Quad flipping continuously But hovers fine! Please help!

    I just built a quad and everything seems to be in order. I took it out for the maiden flight and it ended badly! The quad would hover completely fine. I could pitch forward, backwards, roll slightly left and right, yaw left and right, and fly in circles no problem. I then tried a full roll to...