betaflight

Hello Guys :) I was wondering if there´s any cheap FC, which is compatible to the o3 air unit. (best case: Without soldering that white plug, just plug the DJI cable in). I want to use the air unit without a drone, but need an arming signal to get full power & stream quality. Also was thinking...

Hi guys, am Ronnie, I'm new to fpv hobby - i build my first drone Speedybee master 5 V3 with Speedybee F7 V3 stack etc. i bought "Flywoo Goku M10 mini V3 gps" below mention is the problem am facing, please help me I'm very eager to fly this drone. - All connections are wired correctly. - At...

Hi everyone, a few days ago I crashed my iFlight Nazgul5 V3. I broke fans, one arm and a motor (it is stucked but still wired), all of which are very easy to replace. Unfortunately now when i try to connect the BLITZ F7 onboard controller (v1.1) to my laptop (Windows 11) I cannot see it as...

Im building a bicopter. I set all settings up as i have read on the net. have 2 emax rs2205 and a skystars f411 hd flight controller stack. When i have it plugged into betaflight, the motors spin normal. But when I use my transmitter 1 motor jitters, then stops and esc beeps twice, then motor...

I’m new into fpv and I bought the mobula7 with elrs version but since I have a radiomaster boxer 4in1 protocol so I bought a RadioMaster - R81 2.4GHz 8ch Frsky D8 Nano RX and bound it to to radio it says telemetry recovered but it doesn’t fly or show up in betaflight. It was a sbus so I soldered...

Hi everyone, So... I've built and flown RC planes very on and off since I was a kid and recently decided to give FPV drones a try having had a great time flying some planes fpv. I have bought a darwinfpv baby ape, have soldered on (maybe wrong) a flysky fs-a8s receiver and have spent hours...

Dear FPV community, Some judgement would be appreciated. I got a betaflight quad on FC Matek F405-OSD. After 35 seconds of normal flight, I get an RX LOSS warning on the OSD, with the video feed from the camera was still coming. The quad fell into the grass at a distance of 30 meters from me...

Hey everyone! I'm fairly new to all this so I hope you can help me. I have a BETAFPV 95x V3 Pusher VTX with Crossfire. The FC burned several weeks ago because some fabric got in one motor. I removed all the fabric, replaced the FC and connected everything like it was before and now comes my...

Hi, hopefully someone can help as I am losing hair rapidly. I purchased locally here in New Zealand: BetaFPV LiteRadio 2 FrSky TinyHawk 2 BNF I am totally new to drones/quads so I read first that I need to bind them by changing the radio to D8, which I did, and then hit Bind on the radio and...

No Transmitter input after resoldering Hey guys! I just built my first ever fpv racing drone and it worked really well but I wasn’t happy with my cable management and soldering so I went back and moved some parts and shortened some motor cables. I put everything together and my Taranis qx7...

Hey guys!! Good day!! Last weekend was really busy day for me. Because, on saturday...woke up at 4:30AM and drove to spot and enjoyed quad play. And back home, I made video for drone turtle mode until 4:30AM sunday..and had some sleep. And woke up 8AM. :) And I went to church and enjoyed quad...

Recently bought an eachine x220s wizard and flashed betaflight 3.4.0 on it. Enabled Acro Trainer mode to learn acro mode flying in fpv. Anyone know how to increase max angle limit?

I am trying to setup my very first fpv drone. I have a hawk 5 and I followed this tutorial: My controller and drone seems to pair since my drone shows the green light constantly when I power up my Frsky q x7 controller. But if i connect my drone to betaflight using mac I can see all tabs and...

Hey guys! My name is Jin, I`m here from Hiroshima, Japan. I recently bought a Eachine Wizard x220 ARF, and am having a multiple of issues....escpecially with software and driver problems. I own a 2011 Macbook Air (HighSierra) and have a FLY SKY FS-i6 transmitter. Problems: 1. I wanted to...

Hello everybody this is my first adventure into FPV drones, and I sure could use your help ! Let me tell you my story ! Or skip the story and go to the bottom. So, I bought the Rise indorfin 130 fpv racing all-in-one kit. Yeah, I know, I know, but this is litteraly my first...

hey. i recieved my wizard in the mail a few days ago.after binding my reciever and fiddling with updating to betaflight (3.3.2)from the stock eachine setup something changed... when i tested the motors the first time all of them worked fine.after the update motor nr2 wont spin. im thinking maybe...

I found this amazing spot last summer! Last week I went back here! It's always fun to fly here!

Last sunday I went to this local park. I haven't been here for months, but man this park is fun to fly. Beautiful weather and a empty park. What else could I wish on a sunday evening. At the end my friend David showed up. I sure knows how to make an entrance LOL [VIDEO]

The first release candidate of Betaflight 3.2 has been released just over 2 weeks ago. After hearing so many good things about it, I decided to test it out myself!