Recent content by stratosphere

Another tip, you can slide the + and - out from the cable plug if you lift the tiny plastic tabs with a utility knife, then you can twist some wire to the bare metal ends to attach to your test power source

Any dc power source really, just check the max voltage the o3 takes, don't overload it and use what you have, a 4s battery would probably do just fine, i use a desktop dc power supply and runnit at 9 or 12v, the o3 doesn't need to be in a drone to connect to your goggles you can test it...

Also if that doesnt work connect the o3 to 9v by making a custom cable and see if your goggles connect. Might be your flight controller

Check both ends of the o3 cable

Open her up check the plastic connector to the o3 hasn't fallen out could be the voltage wire not connected via the plug . Make sure you are using the dji consumer app on your laptop not the fpv app in order to see the firmware list

Hi Rogo, I'm from Perth also, I'm looking for a mate to fly with around the local quarries if your interested