Recent content by RazinDrone

Yeah so what I did is I checked the board connections like the battery things and on the fc from where the wires connect with a multi meter and I found the problem. It turns out one of the prongs broke and so I externally soldered a wire from the esc to the fc. Hope this helps!

I recommend FPV freerider. I first got the demo and once I was happy with it I bougot the full version for five dollars. You can defenetly find more expensive sims with more capability but I find fpv freerider to be just fine for me. If your not sure get the demo first.

Sorry to hear you have to sell. That sucks.

Sounds good

Update; I fixed the problem Turns out that the negative/ground wire plug from esc to fc was fried and broken off. So I soldered the wire externally. It fixed theproblem. Try to see if your plugs are damaged. Also this happened once before and I changed out the cable that connects the esc to fc...

Ok

Isn’t it fury f4 osd?

I hope you figure it out.

You Should try to run the motors when you plug it into better flight. takeoff the props and go to the motors tab and try and run the motors that would be my first suggestion I also have the exact same flight controller and ESC.

Maybe you might want to consider calibrating the accelerometer. If that doesn't work maybe try to flash the sofware. But I'm still a beginner so that might not work. Worth a try tho. Hopefully you figure it out. Good Luck!

Just want to know if there are any nifty tricks to fix and maybe need to purchase a new FC. But thanks! And fyi there is normally a red, green, white, flashing blue and orange light.

So as you guys here can see in the photos, my new mamba f405 Mk2 with the 40a matching ESC's and flight controller is not working. To elaborate on my current problem, when I plug in the battery there is a Green, White and feint red light on the Flight controller and I only get the first 3 beeps...