Recent content by Pimeeh

Whoops, did not check the "motor direction is reversed" button, wobbling seems to be fixed now, will test it in the field one I have the chance

I found a video by jushua barrdwell that explains why they are ramping in PRM in the bench, but I still don't know why the motors behave so agressively when I pick up the quad, wich is possibly the same reason why it jumps after wanting to take off.

So I got my transmitter working and added an arm switch, de soldered the smart audio wire for the time being. But right now the quad is behaving quite weird. I set it down in the grass, armed it and slowly raised the throttle untill it would lift off. Instead, it would just make a big jump, and...

8 in the morning, and will be back home at about 5, so I do have some time to do some more research.

Perfect, that means I'm not completely out of options, haha. Will try it in the evening, so we'll see. Do I just connect the smart audio to the led pad, and enable it on that pad?

Hey thanks you two for your replies. I have done some tinkering of my own and connected the RX6 pad, wich is normaly used for gps, to the receiver, and then set serial RX to uart 6. It looks promising, but I haven't had the time to test it in the field, so we'll see. The link wayno provided is...

Hello, I was wondering if anyone hete would have an answer to a problem that I am having. Now, this is my first time building an fpv drone, so there is quite a possibility that I'm missing something obvious but here it goes. Build info that is relevant: Fc: Racerstar F4S AIO...