Good luck, I think the video was about activating the gps rescue before the min_dth but there are alot of videos about setting up gps rescue, hopefully you have checked them out,
Have fun!!!
Pretty important for gps rescue to work but seems not to be your problem. I just reread your question and have a vague memory that Joshua Bardwell has done a video on this very problem on his youtube channel, sorry I couldn't be more helpful.
It is there under gps rescue check box, mine says exactly the same as yours, but that could just be a generic setting, can you tell where yours is on your transmitter screen when your drone is just hovering in one place?
Hi everybody, my Mobula7 has 2 faulty motors and when I swap them around I've found there is nothing wrong with the board. Are there any good replacements around or do I stick to the original motors and where can I get them from please.
Thank you
I had the same sort of problem, if you open up the back of the charge plate you might find a strip of metal that has melted. All I did was solder it up and mine has worked well ever since. Just don't do what you did again 😁
Hi, you can always use it to spot glue any plugs on your flight controller or cameras in case of disconnection.Or as I just saw on the XT60 solder connection on the PDB board ? ,for water protection.
Good morning Nevemak, did you notice the 3 bridging pads , I have included photos of what to look for, you solder either the middle one to the left one or the middle one to the right one depending which receiver you are using. Hope this helps
Shoot, maybe I got it mixed-up with one of my other ones. I had a couple floating around. How can you tell which is which ? I'll have to go home and ? look ?
Hi, yes I accidentally bought an EU/LBT XM+ receiver last year but was able to reprogram it with FFC by an upgrade from Frsky through my transmitter as explained by [email protected] . It was quite simple to do.