Recent content by Jawnyb

OKAY GUYS SO! I managed to update my FC with a different firmware, and now everything works!, But when im throwing in my OLD config file, Somewhere along the line, it stuffs up. But im on the right track, and will update what i find, thankyou all so much for your help, pointed me in the right...

Okay, So an update, Things have gone from okay to bad... I decided it was time to try and erase then reflash Betaflight. I dumped all my data, reflashed it, now im having more problems. I apparently dont have a GYRO now, I have only one PORT, still no battery voltage, and only 3 beeps on...

You are correct, I plugged into betaflight, and im not getting those values... So where am i going wrong...

What do you mean by not wiring vbat to the FC? I thought the FC would be able to pick up the battery voltage as it is getting power to it? as for the RSSI, I’m using a crossfire nano, I’ve wired in two others on different quads and they work perfectly, I may try a different uart, which’ll also...

this is the 3rd receiver I’ve wired in, and the others have worked perfectly, just not this one. I’ll double check the wiring again once I get home from work, butI’m 99% sure I’ve wired it all correctly, as with the other two I have done would it be worth maybe swapping over the rx & & tx to a...

Okay, So checking on my reciever, under the sensors, It turns out my Receiver isnt getting anything for RxBt, Current, ETC. showing exactly what my OSD shows. Also, I am using Crossfire, Is it possible its a connection on my nano that isnt good?

hey! Thanks for the reply So yes, I have turned them all on in the OSD tab, they are actually showing up in the goggles, but just displaying 0, for example 0.00v, 0Amps, 0.00mah but my arm/disarm are showing, Throttle position is showing, just rssi, the amperage, voltage have 0 instead of their...

Hey! So I just got my third quad and this time it was a bind & Fly, Iflight cidora 4s Everything works great, except I’m having some OSF info issues So the OSD is all present and displaying, the armed/disarmed is working fine, and my flight timer is working fine But, my RSSI, Battery Voltage...

Thanks for the welcome! Hope to be part of the flying gang soon :) You had me worried for a moment, I’ve tried to make sure I’ve looked into the products properly, before jumping into buying them

Do you mind if I ask why 15c is bad and 45 or more is better? I’m not entirely sure I understand it

Hey! Thankyou! Long time lurker haha! And Thanks for the quick reply! Sorry, I forgot to mention that yes it is the stack and not not just the standalone. The battery is 4s, 15c And yeah, I was looking at the 2400kv f40’s, I may take your advice there and go for the 1750kv version! Other than...

Hey all! So I’ve been looking into FPV drones for a little while now and finally deciding to pull the trigger and get one! I’ve put together a build, and just wanted to get others opinions and also some help if I’m missing anything, or you just have something to add! Thankyou Current Build...