Welcome to FPVDronePilots!
Join our free FPV drone community today!
Sign up

Recent content by gordman

  1. G

    Extremly weird flight behavior!

    I thought two much out of center would make the drone fight that much more to keep balance in the motor output . So if its a stock setting that clean flight offers and it's not pid settings you selected , I'm curious myself how it could be pid's . And I don't think the board out of center has...
  2. G

    Extremly weird flight behavior!

    Just a quick idea use a smaller battery , looks like you have a 2200 mah and its not centered on your quad . center it better or a smaller 1300 -1500 mah lighter battery centered better on quad also . Quad just might be fighting that balance , it's a small motor spread .
  3. G

    NAZE32 Motor 3 Problem

    Dude you might be really close , I'm pretty sure it's the wires you have strung for power ! Ditch those and get your battery mounted on your drone . The board when it initializes , the gyro orientates itself to level and when you lift off it senses the pull of the wires as if it were wind, and...
  4. G

    NAZE32 Motor 3 Problem

    looked up my last records for Cleanflight for naze32 was 2.0.0
  5. G

    NAZE32 Motor 3 Problem

    That sounds like like battery is't fully charged , make sure your lipo is fully charged . I've battled in the past with several of my electric RC's not acting right and it was an under charged battery , and even more recent with my qx350 drone I would take off and it would drop immediately ...
  6. G

    NAZE32 Motor 3 Problem

    . Check this and apply what might help you .
  7. G

    NAZE32 Motor 3 Problem

    I would be leaning toward the esc or the motor on the number 3 motor , either slightly burned windings on motor or a fet on the esc . I don't know how to test either but you can U-tube or see if Oscar Liang has some articles on testing . I had a build kit with cheap components with what I...
  8. G

    NAZE32 Motor 3 Problem

    First of all don't get discouraged , there's a lot involved in building these , a glitch can be the most frustrating thing . Your building quite a beast it looks like in your video and hopefully your not testing it like you show in the video . Your going to have to clean up and tie up your...
  9. G

    NAZE32 Motor 3 Problem

    Have you used BLHELISUITE to calibrate your esc’s , I had same problem and this fixed mine .
  10. G

    I flew with a helicopter!

    That's probably what you should of posted with the video. Were all just concerned with the FAA hype going on , and want to continue to have fun flying. .
  11. G

    I flew with a helicopter!

    I refuse to watch the video , very irresponsible . W hat if the turbulence of the helicopter knocked your drone antenna off and your drone flew out of control and into the heli's engine crashing it . It's not what you can control it's what you can't ! Think about it ! I just want to fly through...