Recent content by Fungineers

Update: everything is connected and running!!! Seems my radio and rx support sbus so that was a breeze. Still tested on bench. Getting the battery tomorrow!!! Excited Thanks @HighTechPauper !!!

@HighTechPauper thanks! Let me try to hook up and i will let you know :)

@HighTechPauper Thank you! that clears up a lot. Ill power up vtx and cam from Vbat then (they can take upto 40V). On the SBUS protocol: What you mean to say is, that my signal from the receiver can either be SBUS or SBUS Inverted. And since my FC is old, i cant fix this in betaflight, so I...

@HighTechPauper I cant seem to upload image but its a 20A esc. Only one pinout as shown. Then 3 wires out for each motor. Would love if you could shed some light on the questuons about the pinout of the fc

@HighTechPauper thanksss!! Its a racestar v1 4 in 1 esc. And you are correct it doesnt have a built in bec but my fc has a built in bec so looks like im good. Dont need the red wire. Will just short the battery leads to fc and esc! Please take your time. Waiting on the wireup confirmation :)

@HighTechPauper many thanks for the detailed reply. I understand now that I have read (and done some research) that this FC is meant for individual ESCs; but it could work if I wire it up as @rtkDarling has explained. Yes, it wont be neat to connect the battery wires to the ESC, but I really...

Hey @rtkDarling thanks! Ok so the 4 motor wires go to the small round pads. About the esc, it is a eacestar 4 in 1 (v1i think) blheli. It has 4 motor wires and 2 other wires. The red is chopped off and the black is the 5th wire. Heres the picture:

Hey experts I bought this omnibus f4 osd controller but its got a weird board. Cant find any documentation. Where do the wires from eec go?? Theres a weiird v+ and v- for each motor and a small round pad in between..im stumped. Thanks. My esc is 4 in 1 with 5 wires coming off the connector.