Recent content by essco

Vtx and cam uses max 1A, thats nothing in comparison with the motors. It can be only motors or esc. I have 4x tekko32 peak 50A ESC that is exactly 200A that motors pulling now. It also could be a pdb board or to thin cables from pdb to esc. I don't want to change hardware. I have to pass 5kW...

Thank you for reply. I have managed to get it working on 90% throttle limit with a little tuning in blheli suite. Setting Demag to high and setting motor timing to 22 helped a lot. Now motors puls 4,5kW and 200A. But cannot get manage to tweak it to work with 100% throttle. It always desync...

Solder joints are fine, on 4s it drows 160A without a problem, on 6s it should drow less because oh higher voltage. M'i wrong? It has to be something else

Hi guys. I need help from you. I have build high 2500kv 6s racing drone but on full throttle it always desync I have 35v 1000uF cap, 2306 motors, matek f405, 4x tekko32 35A esc Blackbox is looking clean, no hot motors, quad is flying beautifully on 4s and on 6s with throttle limited to 75% I...