Welcome to FPVDronePilots!
Join our free FPV drone community today!
Sign up

Recent content by Doko

  1. D

    Black screen with OSD - Camera Dead?

    Thanks, yea its a shame. The camera is Foxeer monster mini pro.
  2. D

    Black screen with OSD - Camera Dead?

    Hi, After a landing (easy), my camera stopped working. (I see black screen with OSD, changed to another camera and all is fine). (The cap is off of course). I took out the camera chip, checked all solders and connection with a microscope and all seems fine. Also check the cable and the...
  3. D

    Help - FPV black screen No OSD

    Yes I have. Its my first build so a lot is new but I did enables and try to play eith options with no luck.
  4. D

    Help - FPV black screen No OSD

    Hey, Thanks Sambo for yoyr reply. I assume the FC is faulty. RENOVER, my vtx has a 7-17V input, I can power it directly threw the battery but I'm afraid it will burn becausr of voltage or amp spikes ( as esc current chane drasticly). Also I assume there will be a lot of noise. I have considered...
  5. D

    Help - FPV black screen No OSD

    Hey guys, Its my first build, I have a problem with my FPV system. 1. To check the system, I have connected the camera directly to the vtx and the vtx to an outsource 12V power supply and the video is ok and working. 2. I tried to connect only the signal wires through the flight controller and...
  6. D

    Finish build help - electronic shorts

    UPDATE: I have disconnected the wires from the flight controller and when I check with a multi-meter I get the following things: 1. At the flight controller, the VideoIn and the ground are shorted (dont know why). 2.At the VTX, the signal wire is shorted with the ground wire. Anyone has a clue...
  7. D

    Finish build help - electronic shorts

    The signal wires are NOT connected to each other but to the flight controller. The wierd thing is as written, that when checking continuity with the ground of the xt60 connector they both beep.
  8. D

    Finish build help - electronic shorts

    Hi, Just finished soldering my quad ( first time) and I am doing a continuity test. I have noticed the the vtx and camera signal wires create a short, also with the ground connection. Is it ok? The camera power is through the vtx. The signal of the vtx and the camera is connected to the flight...
  9. D

    Help - FPV not consistent Eachine

    Hi, I am totally new in the drone area. Bought an Eachine e013 drone with eachine 800d goggles. Few things are wierd: In order to the fpv to work i need to plug and unplug the battary of the drone several times. When I catch a good connection, it doesnt matter which channel im at, i see the...