Welcome to FPVDronePilots!
Join our free FPV drone community today!
Sign up

Recent content by Cyberpower678

  1. C

    What size screws do you need to mount a standard FPV camera?

    Alright. I have the size I need. They are M2 screws at 4mm, and I'm guessing most FPV cameras have that size.
  2. C

    What size screws do you need to mount a standard FPV camera?

    Yea, but I don't like then owning screws, I'm never going to use.
  3. C

    What size screws do you need to mount a standard FPV camera?

    Then I think it's an M2. I'm going to take a guess and buy some.
  4. C

    What size screws do you need to mount a standard FPV camera?

    The thread depth is definitely not that long. I would peg it at 3mm. But do you have any idea if it's an M1 or M2. They're definitely not M3's or I would have screwed some in by now. :/
  5. C

    What size screws do you need to mount a standard FPV camera?

    As the title suggests, I have an FPV camera that has three screw holes on each side of the module. I have mounting clamps that mount to the frame, but I'm missing screws for it. What size screws are they usually and what length so I can get the right ones?
  6. C

    OK who did it :-/

    Well we’ve established it’s real over in MavicPilots and know who did it. I would recommend making sure he’s banned here in the forums.
  7. C

    Hello from MavicPilots

    DJI has approved the replacement request. Now I have to wait an eternity and a half before they ship it. :p
  8. C

    Hello from MavicPilots

    The motor is fine, but the adapter mounted onto it for the props I use isn't. You can easily order replacements, but considering shipping is $10 + whatever the parts cost, I'm asking DJI to send replacements since the product failed.
  9. C

    Hello from MavicPilots

    I don't know. It hasn't flow that much. It's all new. :p
  10. C

    Hello from MavicPilots

    Well, it's already out of service. :/ One of the quick release prop adapters blew apart during a propless motorless rev. Contacted DJI.
  11. C

    Hello from MavicPilots

    Will do.
  12. C

    Hello from MavicPilots

    Where is the failsafe minimum to be set.
  13. C

    Hello from MavicPilots

    Okay, I get that, but why is the ESC throttle signal below minimum of 1040. Some go to 1000.
  14. C

    Hello from MavicPilots

    My first build naturally isn't the best. It flies, and it flies fast, but the battery is strapped to the bottom. Ideally I would like it to not drops as hard. I set the throttle to a value that will still have it descend, just not freefall, and the horizon mode should level out drone on...
  15. C

    Hello from MavicPilots

    Question, I haven't tested this out in the fields yet, but I have my failsafe set to land with a throttle value of 1100. I also have it set to turn on the beeper, anti-gravity mode, and horizon mode, and to remain powered on at that throttle for 10 seconds, before disarming. My arm minimum ESC...
See more